Top 9 Manual Oil Pump UK – Submersible Pumps

As an Amazon Associate I earn from qualifying purchases.

1. Hilitand

Manual Lubricating Oil Pump Hand Lubrication 500CC CNC 4mm Double Outlet Port Oiler for Punching Lathe Cutting Milling Machine

Hilitand - Easy operation: pull the handle with your hand, the plunger is pushed and the oil in the cylinder is excluded. It is recommended to use oil viscosity N20-N1000 .

Wide applications: this lubricating manual oil pump can be widely used for punching machine, milling machine, lathe machine, cutting machine, etc. Release it, the plunger absorb the oil under the spring force. Durable: made of high quality metal material, wear-resistant, corrosion-resistant has a long service life. Can be part of a lubrication system: this lubricating pump can be combined with a throttling distributor to form a lubrication system. Safe to use for oil transportation. Well sealed: this pump use high-quality seals, not easy to leak.
BrandHilitand
ManufacturerHilitand
Height5 cm (1.97 Inches)
Length4 cm (1.57 Inches)
Weight0.95 kg (2.09 Pounds)
Width6 cm (2.36 Inches)
Part NumberHilitandymo9tawi75

2. Akozon

Lubricating Manual Oil Pump Hand Lubrication 500CC CNC 4mm Double Outlet Port for Milling Punching and Cutting Machine Equipment

Akozon - After loosening, the plunger absorbs the oil under the action of the spring force. Good sealing performance: - Avoid leakage-this manual lubricator oil pump uses high-quality seals and is not easy to leak. After loosening, the plunger absorbs the oil under the action of the spring force. Easy to operate: - just use the hand to pull the handle, then push the plunger and drain the oil in the cylinder.

An important element of the lubrication system: - A manual lubrication pump can be combined with a throttle distributor to form a lubrication system. High-quality materials ensure long: - Lasting performance-this hand pump lubricator is made of high-quality metal materials, with wear-resistant and corrosion-resistant characteristics, and can provide long-term service. Easy to operate: - just use the hand to pull the handle, then push the plunger and drain the oil in the cylinder.

An important element of the lubrication system: - A manual lubrication pump can be combined with a throttle distributor to form a lubrication system. It is recommended to use oil with a viscosity of N20-N1000 Wide range of applications: - the manual lubrication pump has a wide range of applications in daily life, lathes, milling machines, and can be applied to punching machines, cutting machines, etc. Good sealing performance: - Avoid leakage-this manual lubricator oil pump uses high-quality seals and is not easy to leak. It is recommended to use oil with a viscosity of N20-N1000
BrandAkozon
ManufacturerAkozon
Height5 cm (1.97 Inches)
Length4 cm (1.57 Inches)
Weight0.93 kg (2.05 Pounds)
Width6 cm (2.36 Inches)
Part NumberAkozonv5mzeisq68

3. Teekit

Teekit Manual Electric Drill Drive Self Priming Pump Oil Fluid Water Transfer Pumps

Teekit - Pumping speed is fast, can pump 20-30/30-40L water per minutedepends on the rpm of drill. Install all the drill chucks, you can use the electric drill to get the pump, easy an convenient to use. Compact and light weight design, portable and easy to store. Fine workmanship, plastic, durable and has a long service life. Large flow, stable performance and high efficiency, easy installation.
BrandTeekit
ManufacturerTeekit

4. Fdit

1 x Manual Lubricating Oil Pump Metal Lubricating Systems Oil Pump Double Outlet 500CC CNC 4 mm for Punch Machine Reusable Packaging Socialme-EU

Fdit - It is recommended to use oil viscosity N20-N1000 Release, the piston absorbs the oil under spring force. Well sealed: products use high-quality seals that cannot easily leak. Wide range of applications: widely used in die cutting machines, cutting machines, milling machines, lathes, etc. Part of a lubricating system: the pump can be combined with a throttle distributor to form a lubricating system. High quality: made of high-quality metal, wear-resistant, corrosion-resistant. Easy to use: pull by hand on the handle, the piston is pressed and the oil in the cylinder is excluded.
BrandFdit
ManufacturerFdit
Height5 cm (1.97 Inches)
Length4 cm (1.57 Inches)
Weight0.93 kg (2.05 Pounds)
Width6 cm (2.36 Inches)
Part NumberFdit4wmh8egk1g

5. Oumefar

Y-8 Lubricating Oil Pump Double Outlet Port Manual Pump Hand Lubrication with Nylon Base 500CC

Oumefar - Principle of operationour lubricating pump has a pull-type handle, remove the oil in the cylinder, which will push the plunger when it is pulled, loosen it, the plunger absorbs the oil under the action of the spring force.

High quality materialthe manual pump is made of high-quality metal materials, wear-resistant and corrosion-resistant. Notesthe pump can be combined with a throttling distributor to form a lubrication system. It is recommended to use oil viscosity N20-N1000 Widely applicationsthis lubricating device is widely used in punching machines, cutting machines, lathes, milling machines and other mechanical equipment that require regular lubrication. Leakproofour manual pumps have high-quality seals, which are stable during operation and not easy to leak.
BrandOumefar
ManufacturerOumefar
Height5 cm (1.97 Inches)
Length4 cm (1.57 Inches)
Weight0.93 kg (2.05 Pounds)
Width6 cm (2.36 Inches)
Part NumberOumefary62gzviux3

6. BuleEco

Oil Fluid Water Transfer Pumps, Manual Electric Drill Drive, BuleEco Portable Self Priming Pump, Small Water Pump

BuleEco - Install all the drill chucks, you can use the electric drill to get the pump, easy an convenient to use. Pumping speed is fast, can pump 20-30/30-40L water per minutedepends on the rpm of drill. Fine workmanship, plastic, durable and has a long service life. Compact and light weight design, portable and easy to store. Large flow, stable performance and high efficiency, easy installation.
BrandBuleEco
ManufacturerBuleEco
Height5 cm (1.97 Inches)
Length5 cm (1.97 Inches)
Weight0.26 kg (0.57 Pounds)
Width5 cm (1.97 Inches)
Part Number200813MQ01
Model200813MQ01

7. Draper

Draper 77057 Manual and Pneumatic Oil Extractor

Draper - Waste oil tank manufactured from translucent and hydrocarbon-resistant plastic. Supplied with 1. 5 m of suction tube and three extraction straws. Without the removal of the oil drain plug.

Waste oil tank manufactured from translucent and hydrocarbon-resistant plastic. Supplied with 1. 5 m of suction tube and three extraction straws. Easily operated by using either hand pump action or compressed air supply. For the extraction of oils from motor vehicles, gearboxes, marine engines, motor bikes, generators etc. For the extraction of oils from motor vehicles, motor bikes, marine engines, gearboxes, generators etc. Easily operated by using either hand pump action or compressed air supply. Without the removal of the oil drain plug.
BrandDraper
ManufacturerDraper
Height25.9 cm (10.2 Inches)
Length65.2 cm (25.67 Inches)
Weight5.01 kg (11.05 Pounds)
Width27.8 cm (10.94 Inches)
Part Number77057
Model77057

8. Cocoarm

40-60L/min Manual Adjustable Lever Barrel Pump Diesel Oil Transfer Hand Operated Extractor with Removable Nozzle for Conveying Fuel Liquids, Lever Action Barrel Drum Pump

Cocoarm - Humanized design:ergonomically designed lever handle assures firm grip for comfort and safer operation and increased leverage - develops more pressure with less effort. High efficiency:this pump is designed for dispensing and transferring liquids, and it will help you to pump oils, diesels quickly and easily, self-adjusting telescopic suction tube for flexible dispensing and operating.

Widely use:the high quality pump provides excellent fluid compatibility, kerosene, and it is ideal for pumping diesel, engine oil, hydraulic oil and other non-corrosive liquids.

Strong & durable:lever action barrel drum pump is made of high-quality materials, strong and durable, and has a long service life; The Lever Action Barrel Drum Pump self-adjusting telescopic siphon can reach the bottom of the deep barrel. Removable:the removable nozzle fits hose easily and it is bend to make a convenience for using.
BrandCocoarm
ManufacturerCocoarm
Height9 cm (3.54 Inches)
Length37 cm (14.57 Inches)
Width15 cm (5.91 Inches)

9. Surebuy

Double Port Manual Pump Y-8 Lubricating Oil Pump Wear-resistant Side Vertical for Cutting Machines, 500CC CNC 4mm Oil Pump

Surebuy - Pull the handle with your hand, the plunger is pushed and the oil in the cylinder is excluded. Release it, the plunger absorb the oil under the spring force. The pump can be combined with a throttling distributor to form a lubrication system. Products use high-quality seals, not easy to leak. Widely used in punching machine, milling machine, cutting machine, lathe machine, etc. Made of high quality metal material, wear-resistant, corrosion-resistant. It is recommended to use oil viscosity N20-N1000 .
BrandSurebuy
ManufacturerSurebuy
Height5 cm (1.97 Inches)
Length4 cm (1.57 Inches)
Weight0.95 kg (2.1 Pounds)
Width6 cm (2.36 Inches)
Part NumberSurebuy7z3xi10otg4546