As an Amazon Associate I earn from qualifying purchases.1. Fluke
Fluke 1AC VoltAlert Non-Contact Voltage Detector 200 to 1000 Volt AC Audible Buzzer and Light Indicator
Fluke - Quick and easy detection of cable breaks in exposed cables, for example cable reels. Voltbeattm technology and continuous self-test - so you always know it's working. Practical size so you can take it wherever you like on the go, without any struggle. Upon detection, tip glows and beeper sounds.
2. Fluke
Fluke 1AC II VoltAlert, Non-Contact Voltage Detector Pen CAT IV 1000V
Fluke - Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise if not switched OFF indicates the presence of voltage. The audible tone can also be switched off if silent operation is desired.
Easy to use: the portable voltalert ac non-contact voltage testers from fluke are simple and straightforward to operate – just touch the tip to a terminal strip, or supply cable. When the tip glows red and the unit beeps, outlet, you know there's voltage present. Buy with confidence: since being founded in connecticut, usa in 1948, fluke has become the world leader in test and detection equipment trusted by professionals.
When the battery voltage drops below two volts, VoltBeat provides visual indication by stopping the VoltBeat flash. Voltbeat is a self-test feature for visual confirmation of battery and system integrity, and power on.
Cat iv 1000v ac voltage: voltage detection of 200 to 1000 v ac, safety personnel, maintenance, service, a wide range to suit a broad spectrum of residential, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, commercial and industrial needs. Use the fluke 1ac ii if you need a quality tool for general voltage detection. Electricians, in the shop, or at home. Tester comes complete with 2 x AAA batteries installed and a 2 year warranty as standard.
| Brand | Fluke |
| Manufacturer | Fluke |
| Height | 2.5 cm (0.98 Inches) |
| Length | 14.8 cm (5.83 Inches) |
| Weight | 0.06 kg (0.13 Pounds) |
| Width | 1.8 cm (0.71 Inches) |
| Part Number | Fluke 1AC II |
| Model | Fluke 1AC II |
| Warranty | 1 Year |
3. Fluke
200V-1000V, Fluke FLK2AC/200-1000VC ACV Detector
Fluke - Category iv - 1000 v overvoltage rated product for best in class user protection. Voltage Testers. Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready. Innovative 'battery Check' button function ensures battery is in good condition.
| Brand | Fluke |
| Manufacturer | Fluke |
| Weight | 0.15 kg (0.33 Pounds) |
| Part Number | FLK2AC/200-1000VC |
| Model | FLK2AC/200-1000VC |
4. Fluke
Comes With Fluke 323 400 Amp / 600 Volt AC/DC True-RMS Clamp Meter, Measures Resistance Up To 40 Kilohms, Current And Voltage PLUS C33 Protective, 1AC Non-Contact Voltstick/Volt Detector & TL175 Test Lead Set, Durable Carry Case, Fluke Combo Set KITX
Fluke - Fluke 323 ac/dc compact clamp meter! fluke 1ac ii voltalert non-contact voltage Detector! Fluke c33 meter carry case and Fluke TL175 Premium Test Leads Included! New uk edition!! All our stocks are Genuine Fluke UK Products.
5. Labgear
Labgear Voltage Detector Electrical Tester Pen 2-in-1 with LED Torch and Audible Tone Non Contact Power Cable Testing
Labgear - Labgear also has an enviable reputation for innovation, quality, reliability and excellent customer service. Built in led torch: complete with a handy built-in flashlight, the labgear voltage detector is perfect for illuminating dark work areas especially in harder to reach areas so you can see what you are doing without external light sources.
Multi purpose: ideal for use in identifying the presence of ac voltage at socket outlets, fuses, switches, circuit breakers, luminaries, wires and cables. It can identify breaks in conductors by tracing along the cable from the source to the point where the indicator no longer illuminates; and also identify a blown fuse while in circuit.
Safe and reliable: this easy to hold and ergonomic pen-style voltage finder signals the detection of voltage through the illumination of a glowing red led situated within the tip as well as a clear audible tone for a dual feedback response.
A brand you can trust: founded in 1932, labgear are a proudly british company designing and manufacturing high quality products used by professionals. Ac voltage detection: the labgear voltage detector pen is a quick and simple method for non-contact detection of the presence of ac voltages from 90v to 600v with improved balance sensitivity for more accurate detection.
6. Fluke
Fluke Fluke 1AC II VoltAlert Electrical Tester
Fluke - Upon detection tip glows and beeper sounds. 20 v to 90 v ac control circuit model also available. Cat iv 1000 v for added protection. Expanded range: 200 v ac to 1000 V AC. Voltbeat technology and continuous self-test – so you always know it's working.
| Brand | Fluke |
| Manufacturer | Fluke |
| Height | 2.5 cm (0.98 Inches) |
| Length | 14.8 cm (5.83 Inches) |
| Weight | 0.08 kg (0.18 Pounds) |
| Width | 1.8 cm (0.71 Inches) |
| Part Number | Fluke 1AC II |
| Model | Fluke 1AC II |
| Warranty | 2 year manufacturer |
7. Fluke
Fluke LVD2 Volt Light / Voltage Tester
Fluke - Detects from 90 to 600 V AC. A cat iv 600 v rated non-contact detector that is suitable for commercial and industrial applications. Led light with 100, 000 hour life. Dual Sensitivity.
| Brand | Fluke |
| Manufacturer | Fluke |
| Height | 6.4 cm (2.52 Inches) |
| Length | 1.8 cm (0.71 Inches) |
| Weight | 0.04 kg (0.09 Pounds) |
| Width | 25.8 cm (10.16 Inches) |
| Part Number | 2740300 |
| Model | LVD2 |
8. Martindale Electric
Martindale NC4 Dual Sensitivity Non-contact Voltage Tester
Martindale Electric - Two ranges 12v – 1000v and 50v – 1000V AC. Clear tip for high visibility indication. Led pulse and auto power off. Audible and visual indication. Extended probe for easy access. Led torch for use in low light.
9. Martindale
Martindale VT25 Two Pole Voltage and Continuity Tester, Yellow
Martindale - Single pole phase test 90 - 690 V. Measures 12 - 690 v AC/DC. Continuity - optical and acoustic indication. Phase rotation test 100 - 690 V. Auto power off and white LED torch light.
| Brand | Martindale |
| Manufacturer | Martindale Electric Co Ltd |
| Height | 2.3 cm (0.91 Inches) |
| Length | 25.8 cm (10.16 Inches) |
| Weight | 0.18 kg (0.4 Pounds) |
| Width | 7.3 cm (2.87 Inches) |
| Part Number | VT25 |
| Model | VT25 |
| Warranty | 2 year. |
Fluke - Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise if not switched OFF indicates the presence of voltage. The audible tone can also be switched off if silent operation is desired.
Labgear - Labgear also has an enviable reputation for innovation, quality, reliability and excellent customer service. Built in led torch: complete with a handy built-in flashlight, the labgear voltage detector is perfect for illuminating dark work areas especially in harder to reach areas so you can see what you are doing without external light sources.
Fluke - Upon detection tip glows and beeper sounds. 20 v to 90 v ac control circuit model also available. Cat iv 1000 v for added protection. Expanded range: 200 v ac to 1000 V AC. Voltbeat technology and continuous self-test – so you always know it's working.
Fluke - Detects from 90 to 600 V AC. A cat iv 600 v rated non-contact detector that is suitable for commercial and industrial applications. Led light with 100, 000 hour life. Dual Sensitivity.
Martindale Electric - Two ranges 12v – 1000v and 50v – 1000V AC. Clear tip for high visibility indication. Led pulse and auto power off. Audible and visual indication. Extended probe for easy access. Led torch for use in low light.
Martindale - Single pole phase test 90 - 690 V. Measures 12 - 690 v AC/DC. Continuity - optical and acoustic indication. Phase rotation test 100 - 690 V. Auto power off and white LED torch light.
