As an Amazon Associate I earn from qualifying purchases.1. SEBSON
Infrared Motion Sensor, LED suitable, programmable, SEBSON PIR Sensor Light Switch, Range max. 9m/160°, Wall Mounted, Flush Mounted
SEBSON - The built-in motion detector can also be adjusted according to the ambient brightness in the range between 3 and 2, 000 LUX. Scope of delivery: 1 x SEBSON IR motion detector flush-mounted.
Sebson motion detector for indoor and flush mounting, installation dimensions 50x50x33mm, 3-Wire. 10 seconds to 7 minutes, the motion detector switches off again.
The infrared sensor detects movements in a detection range of up to 9m at a detection angle of 160° and switches on the connected lighting. After a preset time of approx. The motion detector has a maximum power consumption of 100W for LED lamps or other energy-saving lamps.
| Brand | SEBSON |
| Manufacturer | SEBSON |
| Height | 4.3 cm (1.69 Inches) |
| Length | 8 cm (3.15 Inches) |
| Weight | 0.1 kg (0.22 Pounds) |
| Width | 8 cm (3.15 Inches) |
| Part Number | IR_WAL_B |
| Model | IR_WAL_B |
2. LOWENERGIE
Long Range Occupancy Sensor 180 degree PIR Light Switch Wall Mounted
LOWENERGIE - Higher savings if controlling tungsten or halogen lighting. Occupancy sensor switches are commonly used to control lighting and extract ventilation. All our pir and microwave switches have CE marking and have a 1 year warranty.
They will save energy by ensuring lights and fans are not left on. In a domestic application these products are well suited to rooms such as integral garages, store rooms, toilets, or any other room where lighting may accidentally be left turned on.
Potential energy savings in commercial property will be far greater with shorter payback times, toilets, store rooms, generally less than one year. The energy savings will be high with a short energy saving investment payback time if connected to average energy level lighting such as fluorescent tubes, or compact fluorescent lamps.
Payback is the time it takes for an investment in energy conservation to repay its cost in energy savings. This product is ideally suited to circulation areas, kitchens, common stairs wells or corridors where there are are frequently people passing in an out of an area and the lighting often gets left on all day.
3. Taidda
LED Outdoor 180 Degree Security Infrared PIR Motion Sensor Detector Wall Light Switch, 90~250V Body Sensor Inductor Switch
Taidda - Motion detectors, motion sensor turns lights ON automatically when motion is detected and OFF after a pre-selected time delay 5sec to 6minutes. Gate sensor, easy to install. Automatic, convenient, safe and practical. Wide detection range: motion Sensor Alarm, Made up of up and down, left and right service field.
Driveway sensor, it utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once. Flex motion sensor, Motion sensor can identify day and night automatically.
| Brand | Taidda |
| Manufacturer | Taidda |
| Height | 47 cm (18.5 Inches) |
| Length | 156 cm (61.42 Inches) |
| Width | 60 cm (23.62 Inches) |
| Part Number | Taiddah0wi95bqtz |
4. WMLBK
Motion Sensor Light Switch,Automatic Infrared PIR Motion Sensor Switch for LED Light Recessed Wall Lamp
WMLBK - Functionadjust the light to soft and stable without flicker. Easy to install and useit does not need to spend too much time, it can be installed directly. Automatic detectioncomfortably let the light automatically turn on/off.
The switch can detect the infrared rays of the human body and use the infrared rays to control the load. Applicationvarious loads such as incandescent lamps, energy-saving lamps, fluorescent lamps, LED lamps, etc. Scenariosuitable for garages, stairs, corridors.
| Brand | WMLBK |
| Manufacturer | WMLBK |
| Part Number | WH2021072189 |
5. SEBSON
Range max. 10m/190°, SEBSON® PIR Sensor Light Switch Outdoor, Installation 53x53x23mm, IP65, LED suitable, Infrared Motion Sensor, Wall Flush Mounted
SEBSON - Sebson motion detector for outdoor use or the bathroom - flush wall mounting - installation dimensions 53x53x23mm, product dimensions 86x86x63mm, 3-Wire.
The motion detector has a maximum power consumption of 1, 200W for incandescent lamps and 600W for LED lamps or other energy-saving lamps. The detection range of the infrared sensor is 10m and 190°.
The built-in motion detector can also be adjusted according to the ambient brightness in the range between 3 and 2, 000 LUX. The duty cycle is 10 seconds to 30 minutes or permanently on or off. Included in delivery: 1x SEBSON IR motion detector.
| Brand | SEBSON |
| Manufacturer | SEBSON |
| Height | 6.3 cm (2.48 Inches) |
| Length | 8.6 cm (3.39 Inches) |
| Weight | 0.12 kg (0.28 Pounds) |
| Width | 8.6 cm (3.39 Inches) |
| Part Number | IR_WAL_F |
| Model | IR_WAL_F |
6. Hyuduo
90~250V 180 Degree Infrared PIR Motion Sensor Detector Wall Light Switch for Led Lights
Hyuduo - Wide detection range: Made up of up and down, left and right service field. Built-human infrared sensor module, delay switch module.
Easy to install. Automatic, convenient, sensor module light effects, safe and practical. It utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once.
Motion sensor can identify day and night automatically, and the external environment illuminance can freely choose the starting job. Motion sensor turns lights on automatically when motion is detected and OFF after a pre-selected time delay 5s to 6minutes.
| Brand | Hyuduo |
| Manufacturer | Hyuduo |
| Height | 4.7 cm (1.85 Inches) |
| Length | 15.6 cm (6.14 Inches) |
| Weight | 0.1 kg (0.22 Pounds) |
| Width | 6 cm (2.36 Inches) |
| Part Number | Hyuduoxqea2k6m7o |
7. Eboxer
Selection Switch, Infrared Motion Sensor, Wall mounting, fits Standard faceplate, LED Suitable, Eboxer PIR Motion Sensor Light Switch
Eboxer - The light sensitivity and the delay of time can be adjusted itself. On/off and pir operation settings. When the switch is turned to. Commonly used to control lighting and extract ventilation.
Convenient and easy to use. The internal electromagnetic compatibility design will not affect the normal operation of other electrical appliances.
| Brand | Eboxer |
| Manufacturer | Eboxer |
| Height | 3.5 cm (1.38 Inches) |
| Length | 8 cm (3.15 Inches) |
| Weight | 0.1 kg (0.22 Pounds) |
| Width | 8 cm (3.15 Inches) |
| Part Number | Eboxeru3etgwkbz0 |
8. K M Electronics
K M Electronics® PIR Automatic Movement Motion Sensor Activated Wall Light Switch OVERIDE Switch
K M Electronics - Pir automatic motion activated wall light switch. Safe & reliable. Time lag 1 to 16 minutes adjustable. Requires a neutral wire. Reduce energy bills.
SEBSON - The built-in motion detector can also be adjusted according to the ambient brightness in the range between 3 and 2, 000 LUX. Scope of delivery: 1 x SEBSON IR motion detector flush-mounted.
LOWENERGIE - Higher savings if controlling tungsten or halogen lighting. Occupancy sensor switches are commonly used to control lighting and extract ventilation. All our pir and microwave switches have CE marking and have a 1 year warranty.
Taidda - Motion detectors, motion sensor turns lights ON automatically when motion is detected and OFF after a pre-selected time delay 5sec to 6minutes. Gate sensor, easy to install. Automatic, convenient, safe and practical. Wide detection range: motion Sensor Alarm, Made up of up and down, left and right service field. Driveway sensor, it utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once. Flex motion sensor, Motion sensor can identify day and night automatically.
WMLBK - Functionadjust the light to soft and stable without flicker. Easy to install and useit does not need to spend too much time, it can be installed directly. Automatic detectioncomfortably let the light automatically turn on/off. The switch can detect the infrared rays of the human body and use the infrared rays to control the load. Applicationvarious loads such as incandescent lamps, energy-saving lamps, fluorescent lamps, LED lamps, etc. Scenariosuitable for garages, stairs, corridors.
SEBSON - Sebson motion detector for outdoor use or the bathroom - flush wall mounting - installation dimensions 53x53x23mm, product dimensions 86x86x63mm, 3-Wire.
Eboxer - The light sensitivity and the delay of time can be adjusted itself. On/off and pir operation settings. When the switch is turned to. Commonly used to control lighting and extract ventilation. Convenient and easy to use. The internal electromagnetic compatibility design will not affect the normal operation of other electrical appliances.
