As an Amazon Associate I earn from qualifying purchases.1. Wärmer System
Basin and Sink Mixers,Tap Tails Connector for Mixer Taps,Flexible Tap Tails Replacement, Wärmer System M10 x 15mm Copper Tap Tails for Monobloc
Wärmer System - They don't get twisted on tightening up. The m10 thread screw straight into the bottom of the Monoblock, basin or sink tap.
Direct flexi tails replacement: This copper tap tails are more reliable and offer that extra support to the taps to prevent them from moving or becoming loose. Compatible with different fittings: The 15mm end could go into a compression fitting, a fitting that includes solder or a fitting that would need solder.
Easy installation: they are very easy to fit. This tap tails are more durable than flexi tap tails due to material they are made of. Stronger durability: made of copper.
2. JPGhaha
JPGhaha 2 Pack 500mm Monobloc Hose Flexible Tap Connector Compressed Braided Supply Pipe Tail M10 x 1/2’’ BSP Stainless Steel for Kitchen Bath Universal Replacement
JPGhaha - Applicable places: 2 flexible hose pipe tap tails for monobloc basin, which can be directly connected to kitchen and bathroom accessories. High-quality inner tube: the inner tube adopts high-quality EPDM inner tube, which is anti-aging and not easy to corrode.
Premium material: the outer flexible tap pipe is made of high-quality 304 stainless steel, 8 strands of precision braided anti-leakage, high temperature resistance, anti-rust, compression and explosion-proof, and the service life is longer than ordinary faucet connectors.
Packing size: 2 pieces of stainless steel flexible tap pipe, which can be used to replace the hot and cold water joints in the bathroom. Suitable for most standard toilets, faucets and single cold faucets.
Convenient installation: jpghaha’s copper pipe length design is moderate, the M10/10 mm long male end is connected to the integral faucet. The total length of the hose is 500mm, the inner diameter of the copper joint is 6. 5mm, and the length of the copper tube is 42mm. The outer diameter is 10mm. It is a must-have good thing for our homes in modern life. It is more convenient to use with a longer male end.
| Brand | JPGhaha |
| Manufacturer | JPGhaha |
| Height | 2.2 cm (0.87 Inches) |
| Length | 50 cm (19.69 Inches) |
| Weight | 0.17 kg (0.37 Pounds) |
| Width | 0 cm (0 Inches) |
3. MILANO
Modern Mono Basin Mixer Tap with Lever Handle, Brushed Copper, Milano Amara
MILANO - Modern mono basin mixer tap. Solid brass construction with brushed copper finish. Ceramic disc technology to prevent leaks and drips. 10 year guarantee to ensure strength and long-lasting durability. Ergonomic lever handle for intuitive control of the flow and temperature.
| Brand | MILANO |
| Manufacturer | Milano |
| Weight | 1.45 kg (3.2 Pounds) |
| Part Number | BT0041CP |
4. EVG
Xcel Home 2 x 10mm x 1/2 BSP 500mm Long Kitchen/Basin Monobloc Mixer Tap Connector Flexi Pipes Tails -FBA
EVG - Highest quality grade 304 long life stainless steel braided flexible hoses. Xcel home branded m10 x1/2 bsP 500mm long sold as a pair flexi pipe connectors.
Rust, corrosion and lead free. Standard uk 1/2” bsp fitting for connecting 15mm male plumbing fittings. Tap tail end: m10/10mm long & short male ends connects to the monobloc tap.
5. EVG
Xcel Home™ 2 x M12 x1/2 BSP 500mm Kitchen/Basin Monobloc Mixer Tap Connectors Flexi Pipes Tails Short Male End || Product Code: FPM12-500SX1 ||
EVG - Rust, corrosion and lead free. Highest quality grade 304 long life stainless steel braided flexible hoses. Xcel home branded m12 x1/2 BSP 500mm long flexi pipe connectors.
Standard uk 1/2” bsp fitting for connecting 15mm male plumbing fittings. Tap tail end: m12/12mm short male ends connects to the monobloc tap.
6. YAAVAAW
2 Pack Brass Garden Hose Tap Connector,1/2 inch Brass Male Threaded Tap Connector for Hose Pipe,Copper 1/2" BSP Hose Connector Male Watering Fittings for Threaded Faucet Adapter Quick Connector
YAAVAAW - Note: if the tap do not connect well, you can wind sealant tape on the tap, then the connect will better. Maximum diameter: 23mm/091" approx.
Material:made of solid brass, resistance to corrosion and no rust, quality and durable material provides years of extended use. Minimum diameter: 15mm/063" approx. Packaging:2 x 1/2 inch brass male threaded tap connector 2 x 3/4 '' Tap Connector washers 24mm 2 x 1/2 '' Tap Connector washers 19mm 2 x 'O' rings 16mm.
Size: suitable for 1/2" threaded water gun tail. Perfect for spray guns, and other accessories. Applications:this hose fittings widely used in gardening, sprinklers, lances, coarse thread tap connecting and washing machine installation.
7. Pipestation
Pipestation Bolofix 15mm X 1/2" Male Iron Flat Faced Isolating Valve for Tap Connector Flexi Pipes Pack of 2
Pipestation - Chrome bolofix 15mm x 1/2" male iron flat faced isolating valve is the ideal for use with both hot & cold water system for new fixings as well as for emergency repairs works.
8. Embrass
15mm Compression by 3/8" BSP Male Iron Thread European Flexible Tap Adapters Pair
Embrass - Ideal for connecting European 3/8" flexi connections. Features:Box includes matching crimp sleeves. Steel mesh:Nylon coated.
Wärmer System - They don't get twisted on tightening up. The m10 thread screw straight into the bottom of the Monoblock, basin or sink tap.
JPGhaha - Applicable places: 2 flexible hose pipe tap tails for monobloc basin, which can be directly connected to kitchen and bathroom accessories. High-quality inner tube: the inner tube adopts high-quality EPDM inner tube, which is anti-aging and not easy to corrode.
MILANO - Modern mono basin mixer tap. Solid brass construction with brushed copper finish. Ceramic disc technology to prevent leaks and drips. 10 year guarantee to ensure strength and long-lasting durability. Ergonomic lever handle for intuitive control of the flow and temperature.
EVG - Highest quality grade 304 long life stainless steel braided flexible hoses. Xcel home branded m10 x1/2 bsP 500mm long sold as a pair flexi pipe connectors. Rust, corrosion and lead free. Standard uk 1/2” bsp fitting for connecting 15mm male plumbing fittings. Tap tail end: m10/10mm long & short male ends connects to the monobloc tap.
EVG - Rust, corrosion and lead free. Highest quality grade 304 long life stainless steel braided flexible hoses. Xcel home branded m12 x1/2 BSP 500mm long flexi pipe connectors. Standard uk 1/2” bsp fitting for connecting 15mm male plumbing fittings. Tap tail end: m12/12mm short male ends connects to the monobloc tap.
YAAVAAW - Note: if the tap do not connect well, you can wind sealant tape on the tap, then the connect will better. Maximum diameter: 23mm/091" approx.
Pipestation - Chrome bolofix 15mm x 1/2" male iron flat faced isolating valve is the ideal for use with both hot & cold water system for new fixings as well as for emergency repairs works.
Embrass - Ideal for connecting European 3/8" flexi connections. Features:Box includes matching crimp sleeves. Steel mesh:Nylon coated.
