As an Amazon Associate I earn from qualifying purchases.1. Makita
Makita SP6000J1 240V 165mm Plunge Saw with 1 x 1.5m Guide Rail + Case & Rail Bag
Makita - Non-slip rubberised Handles - contoured comfort grips handle reduce user fatigue during prolonged use. Close to wall cutting - Can perform a cut only 18mm away from the wall. Depth stopper for splinter free cutting - enables a preliminary cut at a depth of 2mm.
Connectable to a vacuum cleaner - keep workplace free from airborne dust particles. Sawdust ejection backwards for comfortable operation. Tip resistant design - sliding the lever prevents this tool from falling down towards blade case.
2. Makita
Makita SP6000J1 165mm Plunge Cut Saw 240V + 1.5m Guide Rail + Case & 48T Blade
Makita - 1 x makita 48t plunge Saw Blade 165mm. 1 x sp6000j1 240v plunge Saw. Connector carry case. 1 x 1. 5m guide Rail.
3. Makita
Makita SP6000J1 240V 165MM Plunge Saw with 2 x 1.5M Rails, Connector Bar & Bag
Makita - Sawdust ejection backwards for comfortable operation. Connectable to a vacuum cleaner - keep workplace free from airborne dust particles. Non-slip rubberised Handles - contoured comfort grips handle reduce user fatigue during prolonged use.
Depth stopper for splinter free cutting - enables a preliminary cut at a depth of 2mm. Close to wall cutting - Can perform a cut only 18mm away from the wall. Tip resistant design - sliding the lever prevents this tool from falling down towards blade case.
| Brand | Makita |
| Manufacturer | Makita |
| Weight | 12 kg (26.46 Pounds) |
| Part Number | SP6000J1/2 |
4. Makita
Makita SP6000J/2 240V 165mm Plunge Cut Saw Supplied in a Makpac Case
Makita - Locking lever holds the blade in position so that the wrench can be inserted through the hole in the blade for easier blade installation. Large cutting capacity 55mm at 90 degrees, 39mm at 45 degrees.
Easy to set depth adjustment with a large scale. Bevel capacity -1 degrees to 48 degrees with positive stops at 22. 5 degrees and 45 degrees. Built in current limiter to help prevent motor burn out.
Close to wall cutting, only 18mm away from the wall. Depth stopper for splinter free cutting to enable to easily cut a preliminary groove at a depth of 2mm. Precision accurate cutting delivers a splinter free mirror finish. Straight or bevel cutting; blade enters material on the same cutting line. Soft start, variable speed control and constant speed under load.
| Brand | Makita |
| Manufacturer | Makita |
| Height | 8.66 cm (3.41 Inches) |
| Length | 13.39 cm (5.27 Inches) |
| Weight | 4.4 kg (9.7 Pounds) |
| Width | 9.84 cm (3.88 Inches) |
| Part Number | SP6000J |
| Model | SP6000J |
5. Makita
Makita SP6000J1 Plunge Cut Circular Saw 165mm 240v + 1.5m Guide Rail + Case
Makita - Connectable to a vacuum cleaner - keep workplace free from airborne dust particles. Makita presents sp6000j1 240v plunge saw With 1. 5m guide rail in Connector Carry Case. Non-slip rubberised Handles - contoured comfort grips handle reduce user fatigue during prolonged use.
Tip resistant design - sliding the lever prevents this tool from falling down towards blade case. Sawdust ejection backwards for comfortable operation. Depth stopper for splinter free cutting - enables a preliminary cut at a depth of 2mm.
| Brand | Makita |
| Manufacturer | Makita |
| Weight | 7.48 kg (16.5 Pounds) |
| Part Number | SP6000J1 240V |
6. Makita
Makita SP6000J1 165mm Plunge Saw 240V + 1 x 1.5m Guide Rail + Case + Bag + 48T Blade
Makita - Connectable to a vacuum cleaner - keep workplace free from airborne dust particles. Tip resistant design - sliding the lever prevents this tool from falling down towards blade case. Non-slip rubberised Handles - contoured comfort grips handle reduce user fatigue during prolonged use.
Depth stopper for splinter free cutting - enables a preliminary cut at a depth of 2mm. Close to wall cutting - Can perform a cut only 18mm away from the wall. Sawdust ejection backwards for comfortable operation.
7. Makita
Makita SP6000J1 Plunge Saw 165mm 240v + 2 x 1.5m Guide Rail + Case + Bag + 48T Blade
Makita - Tip resistant design - sliding the lever prevents this tool from falling down towards blade case. Depth stopper for splinter free cutting - enables a preliminary cut at a depth of 2mm. Non-slip rubberised Handles - contoured comfort grips handle reduce user fatigue during prolonged use.
Sawdust ejection backwards for comfortable operation. Close to wall cutting - Can perform a cut only 18mm away from the wall. Connectable to a vacuum cleaner - keep workplace free from airborne dust particles.
8. Makita
Bag Blade & Case, Makita DSP600ZJ 36V Brushless Plunge Saw + 2 x 1.5M Guide Rail
Makita - Bevels -1 to 48 degrees Positive stop for bevel adjustment. Electric brake Variable speed control dial. Powered by two 18v li-ion batteries in series to supply energy to the powerful 36V DC motor drive system.
Soft start automatic torque Drive Technology: Automatically changes the cutting speed according to load condition for an optimum operation. Compatible with Guide Rail. Brushless motor Depth stopper for splinter free cutting.
| Brand | Makita |
| Manufacturer | Makita |
| Weight | 5.1 kg (11.24 Pounds) |
| Part Number | DSP600ZJ |
9. Makita
Makita SP6000J 165mm Plunge Cut Saw Complete with Connector Case/ Hex Wrench and Carbide-Tipped Saw Blade
Makita - 2, 000 - 5, 800rpm no load speed. Here: j = makPAC. The other letters behind the Model specification only refers to the scope of delivery. 1, 300w motor.
56mm max cut @ 90 / 40mm max cut @ 45 / 38mm @ 48. 165mm diameter blade. Note: the designation sp6000 in the operating instructions is correct, the instructions always refer to the basic model. 20mm blade bore.
| Brand | Makita |
| Manufacturer | Makita |
| Height | 9.84 cm (3.88 Inches) |
| Length | 13.43 cm (5.29 Inches) |
| Weight | 4.4 kg (9.7 Pounds) |
| Width | 8.86 cm (3.49 Inches) |
| Part Number | SP6000J |
| Model | SP6000J |
| Warranty | One year warrenty from manufacturer. |
10. Evolution Power Tools
1600 W, 230 V-Domestic, Evolution Power Tools R185CCSX+ Multi-Material Circular Saw
Evolution Power Tools - Accurate: 0˚ - 45˚ bevel and 0 – 64 mm adjustable cutting depth with ergonomic, soft grip handles provide maximum control, versatility and precision. Multi-material: 185 mm japanese tungsten carbide tipped TCT blade included cuts steel, wood with embedded nails, aluminium, plastic and more.
R185-tct blade, carry bag and 3 years limited warranty included. Powerful: 1600 w hi-torque motor, optimised gearbox and blade system, increases motor and blade life to cut through a variety of heavy-duty materials.
Channelled air flow and base indicators ensure optimum visibility of your cutting line. Electric brake stops the blade in seconds for additional safety. Instantly workable finish - No heat and no burrs and virtually no sparks when cutting mild steel.
| Brand | Evolution Power Tools |
| Manufacturer | Evolution Power Tools |
| Height | 10.04 cm (3.95 Inches) |
| Length | 14.76 cm (5.81 Inches) |
| Weight | 5.1 kg (11.24 Pounds) |
| Width | 10.43 cm (4.11 Inches) |
| Part Number | R185CCSX+ |
| Model | R185CCSX+ |
| Warranty | 3 years limited warranty. |
Makita - Sawdust ejection backwards for comfortable operation. Connectable to a vacuum cleaner - keep workplace free from airborne dust particles. Non-slip rubberised Handles - contoured comfort grips handle reduce user fatigue during prolonged use. Depth stopper for splinter free cutting - enables a preliminary cut at a depth of 2mm. Close to wall cutting - Can perform a cut only 18mm away from the wall. Tip resistant design - sliding the lever prevents this tool from falling down towards blade case.
Makita - Locking lever holds the blade in position so that the wrench can be inserted through the hole in the blade for easier blade installation. Large cutting capacity 55mm at 90 degrees, 39mm at 45 degrees.
Makita - Tip resistant design - sliding the lever prevents this tool from falling down towards blade case. Depth stopper for splinter free cutting - enables a preliminary cut at a depth of 2mm. Non-slip rubberised Handles - contoured comfort grips handle reduce user fatigue during prolonged use. Sawdust ejection backwards for comfortable operation. Close to wall cutting - Can perform a cut only 18mm away from the wall. Connectable to a vacuum cleaner - keep workplace free from airborne dust particles.
Makita - 2, 000 - 5, 800rpm no load speed. Here: j = makPAC. The other letters behind the Model specification only refers to the scope of delivery. 1, 300w motor. 56mm max cut @ 90 / 40mm max cut @ 45 / 38mm @ 48. 165mm diameter blade. Note: the designation sp6000 in the operating instructions is correct, the instructions always refer to the basic model. 20mm blade bore.
Evolution Power Tools - Accurate: 0˚ - 45˚ bevel and 0 – 64 mm adjustable cutting depth with ergonomic, soft grip handles provide maximum control, versatility and precision. Multi-material: 185 mm japanese tungsten carbide tipped TCT blade included cuts steel, wood with embedded nails, aluminium, plastic and more.
