As an Amazon Associate I earn from qualifying purchases.1. Fischer
40950, fischer Bolt Anchor FBN II 12/10 12x104
Fischer - The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment. Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
The standard anchorage depth achieves the maximum load-bearing capacities. The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility. Pack of 20 Thus fewer fixing points and smaller anchor plates are required.
| Brand | Fischer |
| Manufacturer | fischer |
| Height | 1.2 cm (0.47 Inches) |
| Length | 10.4 cm (4.09 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 1.2 cm (0.47 Inches) |
| Part Number | 40950 |
| Model | 40950 |
| Warranty | 2 year manufacturer |
2. fischer
Electro Zinc Plated, fischer 40777 FBN II 8/70 8x130 mm Bolt Anchor
fischer - The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility. Pack of 20 With the standard anchor depth achieved the fan II high load capacity, this means you less attachment points and smaller anchor plates.
The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment. Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation. The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
| Brand | fischer |
| Manufacturer | fischer |
| Height | 0.01 cm (0 Inches) |
| Length | 13 cm (5.12 Inches) |
| Weight | 0.9 kg (1.98 Pounds) |
| Width | 0.8 cm (0.31 Inches) |
| Part Number | 40777 |
| Model | 40777 |
3. fischer
Electro Zinc Plated, 40664 50-Piece, fischer Fbn II 8/10 8x70 mm Bolt Anchor
fischer - The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required. The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation. The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment. The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
| Brand | fischer |
| Manufacturer | fischer |
| Height | 0.01 cm (0 Inches) |
| Length | 7 cm (2.76 Inches) |
| Weight | 1.17 kg (2.58 Pounds) |
| Width | 0.8 cm (0.31 Inches) |
| Part Number | 40664 |
| Model | 40664 |
4. Unknown
Anchor bolt for attaching heavy loads and steel constructions, Fischer FAZ II 6/10 gvz, ETA approval, heavy duty anchor with high load capacity
Unknown - Maximum load capacity: thanks to the proven expansion clip, the heavy duty anchor introduces the loads particularly securely into the concrete and thus allows the highest load capacity, thus providing maximum safety even in the most demanding applications.
Box contents: 50 x bolt anchors faz ii 6/10 gvz item no. Strong hold for heavy loads: the bolt anchor made of galvanised steel impresses with a flexible mounting for forward, push-through and distance mounting, and also offers optimal attachment of the highest loads with maximum anchoring depth.
542621, steel anchor for heavy loads of Fischer. Reduce time & effort - the steel anchor provides an easy setting process that requires only a few hammer strikes - a separately available cap nut not only enhances the attachment visually but also minimises the risk of injury.
Areas of application: the high-quality anchor bolt is approved for mounting in cracked and non-cracked concrete C20/25 to C50/60 and also suitable for concrete C12/15 and C80/95, ladders, machines, the perfect solution for fastening railings, facades and much more.
5. Legrand
Fischer bolt anchor FAZ II 16/25 electro zinc plated, 10 Pieces, 95836
Legrand - These approvals even cover the use in earthquake zones seismic performance or the use of hollow drills. The international approvals guarantee maximum safety and the best performane.
This allows for a noticeably quicker installation. The faz ll tried and tested expansion clip enables the highest load bearing capacity. Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process.
The reduced anchorage depth new also for M8 version allows for significantly reduced drill hole depths and reduces the number of reinforcement hits. Thus fewer fixing points and smaller anchor plates are required.
| Brand | Legrand |
| Manufacturer | fischer |
| Height | 14.8 cm (5.83 Inches) |
| Length | 14.8 cm (5.83 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 1.6 cm (0.63 Inches) |
| Part Number | 095836 |
| Model | 95836 |
6. Legrand
95420, fischer bolt anchor FAZ II 12/20 electro zinc plated, 20 Pieces
Legrand - These approvals even cover the use in earthquake zones seismic performance or the use of hollow drills. Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process.
The international approvals guarantee maximum safety and the best performane. The reduced anchorage depth new also for M8 version allows for significantly reduced drill hole depths and reduces the number of reinforcement hits.
The faz ll tried and tested expansion clip enables the highest load bearing capacity. This allows for a noticeably quicker installation. Thus fewer fixing points and smaller anchor plates are required.
| Brand | Legrand |
| Manufacturer | fischer |
| Height | 12 cm (4.72 Inches) |
| Length | 12 cm (4.72 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 1.2 cm (0.47 Inches) |
| Part Number | 95420 |
| Model | 95420 |
| Warranty | 2 year manufacturer |
7. fischer
Grey, fischer 95419 FAZ II Bolt Anchor
fischer - This allows for a noticeably quicker installation. The faz ll tried and tested expansion clip enables the highest load bearing capacity. The reduced anchorage depth new also for M8 version allows for significantly reduced drill hole depths and reduces the number of reinforcement hits.
Thus fewer fixing points and smaller anchor plates are required.
Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process. These approvals even cover the use in earthquake zones seismic performance or the use of hollow drills. The international approvals guarantee maximum safety and the best performane.
| Brand | fischer |
| Manufacturer | fischer |
| Height | 11 cm (4.33 Inches) |
| Length | 11 cm (4.33 Inches) |
| Weight | 2.05 kg (4.51 Pounds) |
| Width | 1.2 cm (0.47 Inches) |
| Part Number | 95419 |
| Model | 95419 |
8. Legrand
Fischer FAZ II Anchor Bolts 12/30, GS, 96340
Legrand - One anchor - two installation depths: reduced anchor depth saves time and money when drilling. With expander clip for maximum load-bearing: Fewer attachment points and smaller anchor plates are therefore required, saving both time and money.
Approval for cracked concrete and fire rating: maximum safety. Pre-assembled washer for components with elongated holes; this makes it easier to align and reduces the time needed for installation. Minimum tightening slip: Easy installation reduces time and effort.
| Brand | Legrand |
| Manufacturer | Fischer |
| Height | 9 cm (3.54 Inches) |
| Length | 23 cm (9.06 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 9 cm (3.54 Inches) |
| Part Number | 96340 |
| Model | 96340 |
9. fischer
Grey, fischer 501425 FAZ II Bolt Anchor
fischer - These approvals even cover the use in earthquake zones seismic performance or the use of hollow drills. The faz ll tried and tested expansion clip enables the highest load bearing capacity.
This allows for a noticeably quicker installation. Thus fewer fixing points and smaller anchor plates are required. The reduced anchorage depth new also for M8 version allows for significantly reduced drill hole depths and reduces the number of reinforcement hits.
Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process. The international approvals guarantee maximum safety and the best performane.
| Brand | fischer |
| Manufacturer | fischer |
| Height | 22.3 cm (8.78 Inches) |
| Length | 22.3 cm (8.78 Inches) |
| Width | 1.6 cm (0.63 Inches) |
| Part Number | 501425 |
| Model | 501425 |
10. fischer
Metal, fischer 40827 FBN II Bolt Anchor, 10/10/ 86 mm
fischer - Pack of 50 The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility. The standard anchorage depth achieves the maximum load-bearing capacities.
Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation. The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment. Thus fewer fixing points and smaller anchor plates are required.
| Brand | fischer |
| Manufacturer | fischer |
| Height | 9 cm (3.54 Inches) |
| Length | 23 cm (9.06 Inches) |
| Weight | 2.72 kg (6 Pounds) |
| Width | 9 cm (3.54 Inches) |
| Part Number | 040827 |
| Model | 40827 |
Fischer - The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment. Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation. The standard anchorage depth achieves the maximum load-bearing capacities. The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility. Pack of 20 Thus fewer fixing points and smaller anchor plates are required.
fischer - The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility. Pack of 20 With the standard anchor depth achieved the fan II high load capacity, this means you less attachment points and smaller anchor plates. The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment. Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation. The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
Unknown - Maximum load capacity: thanks to the proven expansion clip, the heavy duty anchor introduces the loads particularly securely into the concrete and thus allows the highest load capacity, thus providing maximum safety even in the most demanding applications.
fischer - This allows for a noticeably quicker installation. The faz ll tried and tested expansion clip enables the highest load bearing capacity. The reduced anchorage depth new also for M8 version allows for significantly reduced drill hole depths and reduces the number of reinforcement hits.
fischer - Pack of 50 The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility. The standard anchorage depth achieves the maximum load-bearing capacities. Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation. The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment. Thus fewer fixing points and smaller anchor plates are required.
