As an Amazon Associate I earn from qualifying purchases.1. SÜA
RUBBER NOZZLE TILT VALVE HELIUM GAS E99 BALLOON FILLER REGULATOR BRASS INFLATOR
SÜA - These balloon fillers are designed to fill latex balloons. We also carry a full line of repair parts & accessories. All fillers are 100% leak tested before shipping.
| Brand | SÜA |
| Manufacturer | SÜA |
| Weight | 15 |
| Part Number | 1C008-0156 |
2. ZQJSKJ
ZQJSKJ Valve Parts Helium Balloon Gas Inflator Tilt Valve 15MPa Balloon Filler Regulator Gas Nozzle
ZQJSKJ - Material: Brass, rubber. Max. Inlet pressure: 15 MPa. Color: black &goldthreadnpT1418Length 108mm/4. 3". Brand new and high quality! Gas service: Helium.
3. SHU-YAN-MZ,
1pc Helium Balloon Gas Inflator Tilt Valve 15MPa Balloon Filler Regulator Gas Nozzle, SHU-YAN-MZ
SHU-YAN-MZ, - Material: Brass, rubber. Thread: npt1/4-18. Quantity: 1pc. Color: black & Gold. Length: 108mm/4. 3".
4. Toolshouse
Helium Tank Regulator Latex Balloon Filler Valve Air Flow Inflator Regulator Meter Gauge for CGA580 Tank Valve
Toolshouse - For cga580 tank valves outlet thread this is the typical Helium and Hydrogen valve for most tanks. Material: our latex balloon inflator regulator is made by durable brass and rubber, enough to use in a long time.
Warning: this product contains one or more chemicals known to the state of california to cause cancer and birth defects or other reproductive harm.
Wash hands afteR USE. Specifications: inlet thread: cGA580, Gauge measuring range: 0-3000PSI. Easy to use: just need to connect it by hand, no wrench needed. Features: easy to read pressure gauge, it can fill both mylar and latex balloons with auto shut off for foil balloons.
5. ShirleyCI
ShirleyCI CCH-RUANGUAN, 1pc Helium Balloon Gas Inflator Tilt Valve 15MPa Balloon Filler Regulator Gas Nozzle
ShirleyCI - Color: black & Gold. Thread: npt1/4-18. Length: 108mm/4. 3". We will despatch the goods as quickly as we can. Material: Brass, rubber.
6. Yagoer
Yagoer 1pc High Quality Helium Balloon Gas Inflator Tilt Valve 15MPa Balloon Filler Regulator Gas Nozzle
Yagoer - Quantity: 1pc. Color: black & Gold. Thread: npt1/4-18. Material: Brass, rubber. Length: 108mm/4. 3".
| Brand | Yagoer |
| Manufacturer | ZZY-Tube |
| Weight | 0 kg (0 Pounds) |
| Part Number | ZZY-Tube |
7. Generic
Helium Gas Bottle Set 8 Litres 1.46 m3 Balloon 200 Bar Balloon Inflation + Reducer
Generic - Reducer for helium. Clamps - 2 pieces. Quick coupling type 26/6 mm for hose and gun. Pump gun. Hose 6. 3 mm - 2 metres. Helium gas bottle 4. 0 - full.
8. Sahkgye
Sahkgye Helium Tank Regulator Filler Valve for Balloons with Gauge Pkg/1135 * 150mm
Sahkgye - Does not fit Disposable Helium Tanks. Easy to read pressure gauge With Full And Empty Markings, Durable Brass Fittings.
| Brand | Sahkgye |
| Manufacturer | Sahkgye |
| Height | 9 cm (3.54 Inches) |
| Length | 15 cm (5.91 Inches) |
| Weight | 0.66 kg (1.45 Pounds) |
| Width | 15 cm (5.91 Inches) |
| Part Number | 229141 |
9. Toolshouse
Helium Latex Balloon Filler Air Flow Inflator Regulator Meter Inflating 0-3000 PSI Gauge for CGA580 Tank Valve
Toolshouse - Features: easy to read pressure gauge, it can fill both mylar and latex balloons with auto shut off for foil balloons. Easy to use: just need to connect it by hand, no wrench needed.
Wash hands afteR USE. Material: our latex balloon inflator regulator is made by durable brass and rubber, enough to use in a long time. Specifications: inlet thread: cGA580, Gauge measuring range: 0-3000PSI.
Warning: this product contains one or more chemicals known to the state of california to cause cancer and birth defects or other reproductive harm. For cga580 tank valves outlet thread this is the typical Helium and Hydrogen valve for most tanks.
10. WNJ-TOOL,
WNJ-TOOL, 1pc Helium Balloon Gas Inflator Tilt Valve 15MPa Balloon Filler Regulator Gas Nozzle
WNJ-TOOL, - Material: Brass, rubber. Color: black & Gold. Length: 108mm/4. 3". Quantity: 1pc. Thread: npt1/4-18.
ZQJSKJ - Material: Brass, rubber. Max. Inlet pressure: 15 MPa. Color: black &goldthreadnpT1418Length 108mm/4. 3". Brand new and high quality! Gas service: Helium.
SHU-YAN-MZ, - Material: Brass, rubber. Thread: npt1/4-18. Quantity: 1pc. Color: black & Gold. Length: 108mm/4. 3".
Toolshouse - For cga580 tank valves outlet thread this is the typical Helium and Hydrogen valve for most tanks. Material: our latex balloon inflator regulator is made by durable brass and rubber, enough to use in a long time.
Generic - Reducer for helium. Clamps - 2 pieces. Quick coupling type 26/6 mm for hose and gun. Pump gun. Hose 6. 3 mm - 2 metres. Helium gas bottle 4. 0 - full.
Sahkgye - Does not fit Disposable Helium Tanks. Easy to read pressure gauge With Full And Empty Markings, Durable Brass Fittings.
Toolshouse - Features: easy to read pressure gauge, it can fill both mylar and latex balloons with auto shut off for foil balloons. Easy to use: just need to connect it by hand, no wrench needed.
