Top 10 adhesive magnetic Pad For smoke Alarm UK – Smoke Alarms

As an Amazon Associate I earn from qualifying purchases.

1. ECENCE

No Drilling Or Screws, Fast & Safe Mounting, ECENCE Magnetic Smoke Detector Mount 3pcs Magnetic Adhesive Pads for Smoke Alarms Ø 70mm, Installation Tool with Hole, Fire Protection

ECENCE - The maximum load capacity is 550g. No danger of hitting cables. Light battery change: you willll no longer need any tools for battery replacement and func-tion tests with fire and smoke detectors. Easy mounting: the attachment of the smoke detector magnetic holder is a 1-minute install completely without tools.

Versatility & easy to blend in: you can simply paint the support plate of the smoke detector adhesive mount without affecting its function. Can be used as a smoke detector ceiling mount, for crafts, side mount, some cameras, and other grounded and mounted products. The magnet holders have a hole, so drilling and screwing remains optional. Once mounted, the smoke detector mounting plate will not come loose. To remove the fire alarm, push it away sideways from the smoke detector mounting plate.

With the stick-on smoke alarm, set it and forget it. Simply peel off the adhesive film, affix the magnetic sticky pads to the ceiling and press down with light pressure for 10 seconds. Mount without drilling: these smoke alarm magnets replace the complicated mounting of smoke detectors and fire alarms. Secure hold: the self-adhesive surface and magnetic attachments offers an extra strong hold. The smoke alarm plate is self-adhesive on one side, magnetic on the other.
BrandECENCE
ManufacturerECENCE
Height2 cm (0.79 Inches)
Length8 cm (3.15 Inches)
Weight0.12 kg (0.26 Pounds)
Width8 cm (3.15 Inches)
Part Number4260545435033

2. ZORRO ALERT

Fire Alarm Installation Tool Safe & Simple Mounting No Drilling No Screws No Danger, Fire Alarm Smoke Alarm,5 PCS,Smoke Detector Mount,Magnetic Adhesive Pads Ø 70mm for All Common Smoke Detectors

ZORRO ALERT - No drill, no danger, no fuss, no tool needed, no holes in your ceiling, no mess, protect your house ceiling. Only need magnetic patch and 3M double-sided tape. Wide application: it can be used for smoke detectors, water detectors, some cameras, fire detectors, combo detectors, co detecors, gas detecors, all kinds of ceiling and ground monted products.

Design without drilling: these smoke alarm magnets replace the srew mounting of smoke detectors and fire alarms. Easy mounting: the attachment of the smoke detector magnetic holder is a 10 seconds install completely without tools. No danger of hitting cables. Simply peel off the adhesive film, affix the magnetic sticky pads to the ceiling and press down with light pressure. With the stick-on smoke alarm, set it and forget it.

Once mounted, the smoke detector mounting plate will not come loose. The maximum load capacity is 500g. Light battery change: you will no longer need any tools for battery replacement and func-tion tests with fire and smoke detectors. High bear weight capacity: the self-adhesive surface and magnetic attachments offers an extra strong hold. To remove the fire alarm, push it away sideways from the smoke detector mounting plate.
BrandZORRO ALERT
ManufacturerZORRO ALERT

3. ECENCE

Installation Tool, Fire Protection, ECENCE 3pcs Magnetic Smoke Detector Mount Magnetic Adhesive Pads for Smoke Alarms Ø 70mm, No Drilling Or Screws, Fast & Safe Mounting

ECENCE - Versatility & easy to blend in: you can simply paint the support plate of the smoke detector adhesive mount without affecting its function. Simply peel off the adhesive film, affix the magnetic sticky pads to the ceiling and press down with light pressure for 10 seconds.

Easy mounting: the attachment of the smoke detector magnetic holder is a 1-minute install completely without tools. Can be used as a smoke detector ceiling mount, for crafts, side mount, some cameras, and other grounded and mounted products. The smoke alarm plate is self-adhesive on one side, magnetic on the other. Mount without drilling: these smoke alarm magnets replace the complicated mounting of smoke detectors and fire alarms. Secure hold: the self-adhesive surface and magnetic attachments offers an extra strong hold.

With the stick-on smoke alarm, set it and forget it. To remove the fire alarm, push it away sideways from the smoke detector mounting plate. Light battery change: you will no longer need any tools for battery replacement and func-tion tests with fire and smoke detectors. The maximum load capacity is 500g. No danger of hitting cables. Once mounted, the smoke detector mounting plate will not come loose.
BrandECENCE
ManufacturerECENCE
Height2 cm (0.79 Inches)
Length10 cm (3.94 Inches)
Weight0.55 kg (1.21 Pounds)
Width10 cm (3.94 Inches)
Part Number4260473174523

4. SEBSON

Adhesive, Attachment for Smoke Detectors, SEBSON Magnetic Pads/Magnet Fixing for Smoke Alarm

SEBSON - This self-adhesive magnetic attachment is 3 M glue. Sebson magnetic holder for smoke detectors. No drilling, no screws, no dowels are needed. Two magnetic pads with double sided tape. Clean and quick installation of your smoke detector with the self-adhesive magnetic holder.
BrandSEBSON
ManufacturerSEBSON
Weight0.04 kg (0.09 Pounds)
Part NumberSD_MS

5. com-four

Magnetic holder for smoke alarms, Ø 7 cm 05 pieces, Holder with adhesive pads for smoke detectors, magnetic holder, com-four® Set of 5 magnetic holder for safety detectors

com-four - Quick installation: just peel off the adhesive film, attach the plates to the ceiling and the smoke detector and press on for 10 seconds! Without drilling: this bracket replaces the cumbersome mounting of security detectors.

Once attached, the fire alarm cannot be moved! easy battery replacement: in future, you will no longer need any tools to change the batteries or test the function of the smoke detector! Scope of delivery: 5x magnetic holder set // DIMENSIONS: Ø 7 cm // MATERIAL: metal. There is no risk of hitting wires in the wall! Strong adhesive surface: The self-adhesive surface provides a strong hold.
Brandcom-four
Manufacturercom-four
Part NumberCF9757

6. AVANTEK

MA02, 5-Pack Magnetic Smoke Detector Mount, Magnetic Adhesive Pads for Smoke Alarms Ø 70 mm, No Drilling or Screws

AVANTEK - Quick replacement: no tools needed to replace batteries or smoke detectors; simply remove the installed smoke alarm from the magnetic pads. Broad compatibility: suitable for many x-sense smoke detectors, including sD11, sd12, SD13, SD2J0AX, SD2K0AX, and SD2L0AX; compatible with other model smoke detectors wider than 2.

8 in 70 mm in diameter. Quick & convenient installation: allow you to install your smoke alarms in less than 25 seconds without the need for extra tools, screws, or drilling, and remove the risk of damage to walls or cables. Strong adhesion: premium acrylic foam tape allows for super strong adhesion, firmly fixing the smoke alarm onto a ceiling or wall without the possibility of falling off. Superior suction: these magnetic pads feature 4 round magnets that provide stronger suction when compared to those on the market with only 2 or 3.
BrandAVANTEK
ManufacturerAVANTEK
ModelMA02

7. ECENCE

Fire Protection, No Drilling Or Screws, Installation Tool, Fast & Safe Mounting, ECENCE 3pcs Magnetic Smoke Detector Mount Magnetic Adhesive Pads for Smoke Alarms Ø 50mm

ECENCE - Mount without drilling: these smoke alarm magnets replace the complicated mounting of smoke detectors and fire alarms. Secure hold: the self-adhesive surface and magnetic attachments offers an extra strong hold. Once mounted, the smoke detector mounting plate will not come loose.

With the stick-on smoke alarm, set it and forget it. Light battery change: you will no longer need any tools for battery replacement and func-tion tests with fire and smoke detectors. Easy mounting: the attachment of the smoke detector magnetic holder is a 1-minute install completely without tools. Versatility & easy to blend in: you can simply paint the support plate of the smoke detector adhesive mount without affecting its function. Can be used as a smoke detector ceiling mount, for crafts, side mount, some cameras, and other grounded and mounted products.

The smoke alarm plate is self-adhesive on one side, magnetic on the other. The maximum load capacity is 500g. No danger of hitting cables. Simply peel off the adhesive film, affix the magnetic sticky pads to the ceiling and press down with light pressure for 10 seconds. To remove the fire alarm, push it away sideways from the smoke detector mounting plate.
BrandECENCE
ManufacturerECENCE
Height2 cm (0.79 Inches)
Length16 cm (6.3 Inches)
Width9 cm (3.54 Inches)
Part Number4260545433190

8. DA HAI

Fire Protection, No Drilling Or Screws, Installation Tool with Hole, 5pcs Magnetic Smoke Detector Mount Magnetic Adhesive Pads for Smoke Alarms Ø 70mm, Fast & Safe Mounting

DA HAI - The smoke alarm plate is self-adhesive on one side, magnetic on the other. The maximum load capacity is 550g. Light battery change: you willll no longer need any tools for battery replacement and func-tion tests with fire and smoke detectors.

Mount without drilling: these smoke alarm magnets replace the complicated mounting of smoke detectors and fire alarms. Versatility & easy to blend in: You can simply paint the support plate of the smoke detector adhesive mount without affecting its function. With the stick-on smoke alarm, set it and forget it. Easy mounting: simply peel off the adhesive film, attach the plates to the ceiling and the smoke detector and press for 10 seconds! Secure hold: the smoke detector mounting plate will not come loose.
BrandDA HAI
ManufacturerDA HAI
Part Number11

9. Gletscherstein

For All Smoke Detectors, 5x Smoke Alarm Magnetic Holder GLETSCHERSTEIN, Magnetic Extensions, 3M Adhesive Pads Extra Strong- Smoke Detector Magnet, 5 Pcs, Wall Mounted For Fire Alarms, No Drill

Gletscherstein - There is no risk of damaging the warning detectors, cables or cables when mounting. No drilling – simple smoke detector attachment, without screws and without dirt with our smoke detector magnet set. Simply stick a backing plate to the ceiling and stick the second adhesive plate to the centre of the detector.

Our brackets are made of 2 magnetic metal plates. The individual magnetic plates for smoke detectors are held together by strong neodymium magnets. Mounting in 1 minute – also for carbon monoxide detectors. The magnetic pads for smoke detectors have a diameter of 7 cm. The magnetic pads can be painted over in the desired colour. Extra strong hold – our double-sided extra strong 3M adhesive promises a secure hold for smoke detectors of all kinds. There is a hole on one of our adhesive fixings, so drilling is optional for the customer.

Safety comes first – secure hold and quality are a priority. Click on the shopping cart and make the smoke detectors easy to install with our magnetic attachments, adhesive pads, magnetic holder, adhesive strips. Our magnetic holder for smoke detectors make smoke detector installation possible without tools and without drilling. Easy battery replacement – the practical attachment of the smoke detector makes changing the batteries and a function test of the detectors much easier. Our smoke detector holders are securely packed in a sturdy box.
BrandGletscherstein
ManufacturerGletscherstein
Height0.5 cm (0.2 Inches)
Length7 cm (2.76 Inches)
Weight0.24 kg (0.53 Pounds)
Width7 cm (2.76 Inches)
Part NumberAG-7363

10. mumbi

Mumbi magnetic holder fire detector magnets magnetic pads adhesive attachment 3 m metal plate magnetic attachment smoke detector diameter 70 mm

mumbi - Secure hold on ceilings without screws, dowels etc. Magnetic attachment for smoke detector: magnetic smoke detector can be easily removed for cleaning. Weight of 275 g. Installation of the smoke detector magnet attachment without tools, without drilling and without any dirt or even dust. No more danger of damaging cables or cables when installing the smoke detector. Simple, easy, time-saving mounting of the magnetic fastener. 15 cm and a max. Smoke detector roofing fibre. Magnetic smoke detector holder for smoke detectors with a diameter of at least 8 cm to max.
Brandmumbi
ManufacturerClaus GmbH
Height1.5 cm (0.59 Inches)
Length15.3 cm (6.02 Inches)
Width10.5 cm (4.13 Inches)
Part NumberRauchmelder Magnethalter
ModelRauchmelder Magnethalter
Warranty2 years.