Top 10 40W CO2 Laser Engraving and Cutting Machine UK – Engraving Tools

As an Amazon Associate I earn from qualifying purchases.

1. TEN-HIGH

#ad

50mm Dia for Laser Engraving and Cutting Machine UK Stock, TEN-HIGH CO2 Glass Laser Tube 40W 700mm Length

#ad
TEN-HIGH #ad - Application: this co2 laser tube compatible with all the co2 laser engraving and cutting machine that used laser tube as power, like the diameter and length, but please make sure your machine's installation space, all should be a little bigger than laser tube's size.

Strong heat resistance:the tube body is made of glass containing high borosilicate, the tube body is hard, not easy to deform, and it is not easy to crack at high temperature, heat resistance is strong, the service life can reach 1500H-2500H under normal use. Stable output: single mode output mode, fine spot, strong penetrating power, no change in long-term use spot mode. Easy installation: the wire on positive pole and negative pole had been connected in advance, just connect to the wire on the machine and cover with insulating tape will be ok.

Unique technology: with excellent sealed-off technology to divide air and prevent inside gas diffusion, the laser tube will be more stable and efficient. About the installation of laser tube, here is a video for your reference : https://youtu. Be/mbwyveQZPZ8.
BrandTEN-HIGH #ad
ManufacturerTEN-HIGH #ad
Part NumberTH-40wCO2LT
ModelTH-40WCO2LT

2. UROK

#ad

Z ZELUS Upgraded 40W Co2 Laser Engraving Machine, 300 x 200mm K40 Laser Engraver Desktop DIY Wood Laser Engraver Cutter Second Version

#ad
UROK #ad - 40w laser power: efficient bearing system with engraving area: 300x200 mm 12x8 inch. Precise positioning: this upgraded low-power laser engraving machine utilizes red dot guidance to quickly indicate engraving spots and mark the path of the machine, identifying positioning sizes for easy use.

Usb port easy uploading. Your creativity is no longer restricted by the limited work space. Personalized products, customized keepsakes, textile cutting, woodworking, industrial prototyping and modeling are just a few of the infinite possibilities. Unlimited creativity: this beginner-friendly device will cut and engrave a wide range of materials and offers advanced capabilities for commercial use.

Cutting thickness: 0-3mm depends on material density. Dual platform design: equipped with two engraving platforms so both regular and irregular shaped objects can be easily engraved. Digital lcd controls: upgraded lcd display with the new “emergency stop” switch allows quick machine shutdown in case of emergency. Two displays showing water temperature and laser power monitor the real-time temperature of the machine.
BrandUROK #ad
ManufacturerZ ZELUS #ad
Height24.89 cm (9.8 Inches)
Length79.76 cm (31.4 Inches)
Weight36.29 kg (80 Pounds)
Width49.78 cm (19.6 Inches)
Part NumberUSB3020

3. Sfeomi

#ad

Sfeomi 40W Laser Engraver 200mmx300mm Engraving Cutting Machine LCD Red Dot Pointer USB Port CO2 Laser Engraving Machine for Woodworking Cutting

#ad
Sfeomi #ad - In addition, 2 displays showing water temperature and laser power temperature can inform user the real-time temperature of the machine. Built-in fan: built-in fan and big smoke outlet greatly simplify the installation steps and promote the venting effect, also providing better protection of X/Y axis during transportation.

Dual platform: equipped with dual platform, both regular and irregular can be easily engraved with our USB laser engraving machine, no longer restricted your creation by the shape of materials. Sealed co2 laser beam: the sealed co2 laser beam 40w and the brand new bracket produce stable laser beams with faster cutting speed and longer service life.

Quick positioning: red dot pointer can quickly indicate engraving spots and mark the path of the machine, identifying positioning sizes. Accurate control board: upgraded lcd display with the new “emergency stop” switch, which allows quick stop of the machine in case of emergency.
BrandSfeomi #ad
ManufacturerSfeomi #ad

4. TEN-HIGH

#ad

TEN-HIGH Laser Engraving Cutting Machine 400x300mm 40W CO2 Laser Engraver with USB Port

#ad
TEN-HIGH #ad - Saftythis is a laser engraving machine, and has been independently safety tested. About the installation of machine, it meets CE standards, here is a video for your reference: https://youtu. Be/2dfwsj5o0rU.

Support various image formatopen style software interface, dxf, png, plt, like jpg, compatible with CorelDRAW. Rotary interface installedrotary interface installed in advance, just add one rotary fixture will be ok, if you want to engraving regular cylinder items, here is the link of rotary fixture: https://www. Amazon. Co. Uk/dp/b01hz4wR5O. Functionsmall model with big energy, laser engraving and cutting function, 80w, suggest you choose our 60w, but if you use cutting function frequently, 100w machine.

Applicationengraving area: 11. 8" x 15. 7". Capable to engraving on most non-metal material such as acrylic, density board, plywood, double color plate, solid wood, paper, pvc, plastics, bamboo, leather, fabric, glass, cloth etc. Also support different style image format, BMP, CDR, TIF and so on.
BrandTEN-HIGH #ad
ManufacturerTEN-HIGH #ad
Height41 cm (16.14 Inches)
Length81 cm (31.89 Inches)
Weight50 kg (110.23 Pounds)
Width61 cm (24.02 Inches)
Part NumberTH-CO2-430
ModelTH-CO2-430

5. Z ZELUS

#ad

Z ZELUS K40 Laser Engraver 200mmx300mm Laser Cutter 40W CO2 Laser LCD Display Red Dot Pointer Desktop Laser Engraving Machine with USB Port and Movable Wheels 200mmx300mm with Red Dot

#ad
Z ZELUS #ad - 40w laser powerlaser power: 40w, engraving area: 300x200 mm 12x8 inch,Cutting Thickness: 0-3mm depends on different materials. Dual platform designequipped with dual platform, both regular and irregular can be easily engraved with our machine, no longer restricted your creation by the shape of materials.

In addition, 2 displays showing water temperature and laser power temperature can inform user the real-time temperature of the machine. Wide applicationsuitable for woodworking, rubber stamps, industrial marking, jewelry, aerospace designs, cut scroll patterns, awards and trophy engraving, bar coding, sign making, door pulls, router templates, plastics, finger joints, personalizing, gift manufacturing, architectural modeling, music boxes, puzzle making, gasket cutting, industrial prototyping, textile cutting, cabinetry, inlays and overlays, picture frames, crafts.

High accurate positioningthis upgraded low-power laser engraving machine adds red dot, can quickly indicate engraving spots and mark the path of the machine, identifying positioning sizes. Upgraded lcd display control boardupgraded lcd display with the new “emergency stop” switch, which allows quick stop of the machine in case of emergency.
BrandZ ZELUS #ad
ManufacturerZ ZELUS #ad
Part NumberZ ZELUS

6. Sfeomi

#ad

Sfeomi 40W Laser Engraver 300 x 200mm CO2 Laser Cutter Machine USB Laser Engraving Machine Laser Cutting Machine LCD Display with USB Port

#ad
Sfeomi #ad - Wide applicationthis 40w co2 laser engraver is suitable for various materials, bamboo piece, film, plastics, paper, wood, horns, such as acrylic, leather, plexiglas, crystal, boulder, organic plastic, canvas and other non-metal materials.

Usb port - the universal usb port ensures that the device is compatible with most graphic design programs and Windows 2000, Windows 8, Windows XP, Windows 7, Windows 10. Compatible software - windows 10, 7 64 or 32 bit, xp, 8, 2000 compatible NOT compatible with iOS system. Easy and convenient - the digital electric current display panel guarantees simple operation and control. The integrated fan for better ventilation performance, lower noise level and greater portability.

Software: Shenzhouyi included. Also compatible with CorelDraw NOT included. 300 x 200mm work size - this laser engraver has a large engraving area 300 x 200 mm and strong internal components that can be used to cut or engrave various non-metallic materials such as stone, leather, glass, bamboo, wood, acrylic and 3 mm thick plastic. Works with most graphics design programs.
BrandSfeomi #ad
ManufacturerSfeomi #ad

7. Orion Motor Tech

#ad

Detachable Wheels, Orion Motor Tech 40W CO2 Laser Engraver Cutter with 200 x 300mm Work Area, Red Dot Pointer, Compact for DIY Home Office, Desktop K40 Laser Engraving Machine with Digital Control

#ad
Orion Motor Tech #ad - Integrated cooling fan: never overheat again! The pre-installed exhaust fan provides improved ventilation performance, lower noise level, easier operation, and greater portability.

Upgraded digital controls: the new control panel with LCD display enables users to easily view & adjust the current power volume thanks to the upgraded touch controls. Versatile work surface: the 300 x 200mm engraving surface is equipped with a stability clamp for irregular items and a level board for regular/bulky objects to accommodate products of various dimensions. 4 detachable wheels: Equipped with 4 detachable wheels at the bottom for easy movement and fixation. New red dot guidance: the red dot pointer quickly indicates the engraving point and marks the laser head’s path to identify positioning sizes and make your project setup nearly effortless.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Part NumberCO2 Laser Engraver

8. TEN-HIGH

#ad

TEH-HIGH K9 Reflection Mirrors, 3 Pieces Diameter 20mm K9 Gold-Plated Reflection Lens for CO2 Laser Cutting Engraving Machine 40W or 50W

#ad
TEN-HIGH #ad - It's widely used for low power CO2 laser engraving cutter/engraver 40W or 50W. Material: k9 glass Gold-Plated. Dia:20mm; Thickness:3mm.
BrandTEN-HIGH #ad
ManufacturerTEN-HIGH #ad
Part NumberTH-MS-D20-3T-3PCS-K9-UK

9. QuaLaser

#ad

40W CO2 Glass Laser Tube 700mm Length Dia 50mm 10.6μm for Laser Cutting and Engraving Cutting Machine

#ad
QuaLaser #ad - The life span is about 1800-2500H under normal use. 5. Parameters: 40 watt 700mm length Ø50mm. 2. We have connected the leads, so that you can quickly install the tube.

Each tube has been tested before leaving from our factory, we try our best to give a good shopping experience and make you not waste time and lose money. 1. If it is broken in the transportation, contact us please, we are trying our best to solve your problem. 4. The tube has long-time LIFE because of the especial technology. Upgraded version: upgraded laser tube has a more stable power, which is favorable to increase the cutting speed. Application: it is mainly used for laser engraving cutting machine and other laser equipments. 3. Installation: you need to make sure the positive and negative pole.
BrandQuaLaser #ad
ManufacturerQuaLaser #ad
Part NumberLASER-40W-700-UK

10. Cloudray

#ad

Cloudray 40W CO2 Laser Power Supply MYJG-40 110V 220V for CO2 Laser Engraving Cutting Machine 35-50W MYJG

#ad
Cloudray #ad - Easy control: the start and stop of laser can be easily controlled by TTL level. Good compatibility: it can be applicable to 30-40W Laser Tube manufactured by various factories. Application: sculpture and cut acrylic, fabric, double color sheet and rubber etc. The power supply has output open circuit protection and a buttonto test to output laser manually. Quick response speed and effect, high performance, large cutting power, it also can prolong laser tube service life.
BrandCloudray #ad
ManufacturerCloudray #ad
Weight1500
Part NumberPS06ZM40G2