As an Amazon Associate I earn from qualifying purchases.1. sourcing map
Sourcing map Straight Push Connectors 12mm Quick Release Pneumatic Connector Plastic Union Pipe Tube Fitting Grey 5Pcs
sourcing map - Note: make sure that the cutting surface of the pipe is vertical. Please insert the tube into the bottom before use. 5 pcs for 12mm OD plastic straight tube fitting. Push to connect fittings designed for using to connect with polyethylene, nylon and PU tubing.
The push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance. Mainly used for air compression systems, vacuum systems, pneumatic systems.
2. John Guest
John Guest 12mm Equal Elbow Push Fit Pipe Water Fitting Connector **4 Pack**
John Guest - This means water in the pipe is less likely to freeze and burst the pipe during extreme cold temperatures. A key benefit is its lower thermal diffusivity compared to copper pipes.
The unique collet that grips the pipe and the additional twist and lock mechanism delivery a leak-tight connection. When a push-fit connection is made, it is right first time, every time. Once you go plastic, you never go back plastic push-fit fittings are engineered to very high standards and go through very rigorous testing, passing the necessary BSI and WRAS standards.
However, even if freezing does happen, the pipe expands and can potentially take account of the some added volume, returning to normal dimensions when the ice thaws. Polybutylene pipes have an array of performance advantages.
| Brand | John Guest |
| Manufacturer | John Guest |
| Height | 2.54 cm (1 Inches) |
| Length | 11.43 cm (4.5 Inches) |
| Width | 8.89 cm (3.5 Inches) |
3. sourcing map
Sourcing map Plastic Straight Union Push to Connect Tube Fittings 12mm OD Push Fit Lock Blue 5pcs
sourcing map - Please insert the tube into the bottom before use. Mainly used for air compression systems, vacuum systems, pneumatic systems. The push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance.
Push to connect fittings designed for using to connect with polyethylene, nylon and PU tubing. Pack of 5pcs 12mm OD plastic straight tube fitting. Note: make sure that the cutting surface of the pipe is vertical.
| Brand | sourcing map |
| Manufacturer | sourcing map |
| Height | 5 cm (1.97 Inches) |
| Length | 13 cm (5.12 Inches) |
| Width | 8.99 cm (3.54 Inches) |
| Part Number | a18092200ux0691 |
4. Home.smart
1 x Elbow Connector 12mm Speed Push Fit for Pneumatic Air, Water & Fuel Hoses
Home.smart - Pack of 1. Measurement is the outside Ø diameter of the pipe required. Releasable metric Push Fit Hose Connectors. For connecting pneumatic airlines, water & fuel hoses. Size: 12mm. Releasable metric Push Fit Hose Connectors.
5. sourcing map
Sourcing map Plastic Straight Union Push to Connect Tube Fitting 12mm OD Push Fit Lock Blue 10pcs
sourcing map - Note: make sure that the cutting surface of the pipe is vertical. Push to connect fittings designed for using to connect with polyethylene, nylon and PU tubing. The push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance.
Mainly used for air compression systems, vacuum systems, pneumatic systems. Please insert the tube into the bottom before use. Pack of 10pcs 12mm OD plastic straight tube fitting.
| Brand | sourcing map |
| Manufacturer | sourcing map |
| Height | 5.99 cm (2.36 Inches) |
| Length | 13 cm (5.12 Inches) |
| Width | 11 cm (4.33 Inches) |
| Part Number | a18092200ux0210 |
6. sourcing map
Sourcing map Push to Connect Tube Fitting Male Elbow 12mm Tube OD X G1/2 Thread Pneumatic Air Push Fit Lock Fitting 2pcs
sourcing map - A good release cap can withstand greater and stronger pressure without tripping. Advantage-have abrasion resistance, and resistance to crushing and cracking, Compressive and corrosion resistant, light weight, good sealing performance and long service life.
Good design- push-to-connect tube connection on one end and male threads on the other end. Universal design- product name : elbow push to connect fitting ; type: 90 degree Swivel Elbow Male Connector ;Tube and Thread Size : 12mm OD x G1/2 Male.
Operating pressure : 0-1mpa ; operating temperature：-10 - 60 Degree Celsius. Application- elbow air fitting has quick and simple installation, designed for using to connect with polyethylene, nylon and PU tubing.
7. sourcing map
Sourcing map Straight Push Connectors 12mm Quick Release Pneumatic Connector Plastic Union Pipe Tube Fitting Grey 2Pcs
sourcing map - Mainly used for air compression systems, vacuum systems, pneumatic systems. Push to connect fittings designed for using to connect with polyethylene, nylon and PU tubing. The push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance.
Note: make sure that the cutting surface of the pipe is vertical. 2 pcs for 12mm OD plastic straight tube fitting. Please insert the tube into the bottom before use.
8. sourcing map
Sourcing map Plastic Elbow Push to Connect Tube Fitting 12mm Tube OD Pneumatic Air Push Fit Lock Fitting Blue 5pcs
sourcing map - Operating pressure : 0-1mpa ; operating temperature：-10 - 60 Degree Celsius. Advantage- this air fitting have abrasion resistance, and resistance to crushing and cracking, light weight, Compressive and corrosion resistant, good sealing performance and long service life.
Application- elbow air fitting has quick and simple installation, designed for using to connect with polyethylene, nylon and PU tubing.
Good design- push-to-connect tube connection on two end. A good release cap can withstand greater and stronger pressure without tripping. Universal design- product name : elbow connect fitting ; type: 90 deg Swivel Elbow Connector ; Two Tube Size OD :12mm = 047".
| Brand | sourcing map |
| Manufacturer | sourcing map |
| Height | 8.99 cm (3.54 Inches) |
| Length | 14 cm (5.51 Inches) |
| Width | 10.01 cm (3.94 Inches) |
| Part Number | a18092900ux0120 |
9. sourcing map
Sourcing map Straight Pneumatic Push to Quick Connect Fittings G3/8 Male x 12mm Tube OD 4pcs
sourcing map - Push-to-connect tube connection on one end and male threads on the other end. Material. Have abrasion resistance, light weight, compressive and corrosion resistant, and resistance to crushing and cracking, good sealing performance and long service life.
Designed for using to connect with polyethylene, nylon and PU tubing.
Quick and simple installation. Tube fittings. Advantage. Product name : push to quick fitting; model : pc12-03 ; Tube and Thread Size : 12mm OD x 3/8" G. Operating pressure : 0-09mpa ; operating temperature：0 - 60 Degree Celsius. A good release cap can withstand greater and stronger pressure without tripping.
| Brand | sourcing map |
| Manufacturer | sourcing map |
| Height | 3.99 cm (1.57 Inches) |
| Length | 8 cm (3.15 Inches) |
| Width | 8 cm (3.15 Inches) |
| Part Number | a18092200ux0565 |
10. sourcing map
Sourcing map Plastic Tee Push to Connect Tube Fittings 12mm or 15/32" od Push Lock Blue 3pcs
sourcing map - Operating pressure : 0-1mpa operating temperature：-10 - 60 Degree Celsius. Tube fittings. Product name : plastic tee connect fitting ;Three Tube Size OD : 12mm = 15/32". Quick and simple installation, designed for using to connect with polyethylene, nylon and PU tubing.
Have abrasion resistance, and resistance to crushing and cracking, Compressive and corrosion resistant, light weight, good sealing performance and long service life. Material. Push-to-connect tube connection on Three end. A good release cap can withstand greater and stronger pressure without tripping. Advantage.
| Brand | sourcing map |
| Manufacturer | sourcing map |
| Height | 8 cm (3.15 Inches) |
| Length | 14 cm (5.51 Inches) |
| Width | 13 cm (5.12 Inches) |
| Part Number | a18092200ux0657 |
sourcing map - Note: make sure that the cutting surface of the pipe is vertical. Please insert the tube into the bottom before use. 5 pcs for 12mm OD plastic straight tube fitting. Push to connect fittings designed for using to connect with polyethylene, nylon and PU tubing. The push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance. Mainly used for air compression systems, vacuum systems, pneumatic systems.
John Guest - This means water in the pipe is less likely to freeze and burst the pipe during extreme cold temperatures. A key benefit is its lower thermal diffusivity compared to copper pipes.
sourcing map - Please insert the tube into the bottom before use. Mainly used for air compression systems, vacuum systems, pneumatic systems. The push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance. Push to connect fittings designed for using to connect with polyethylene, nylon and PU tubing. Pack of 5pcs 12mm OD plastic straight tube fitting. Note: make sure that the cutting surface of the pipe is vertical.
sourcing map - Note: make sure that the cutting surface of the pipe is vertical. Push to connect fittings designed for using to connect with polyethylene, nylon and PU tubing. The push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance. Mainly used for air compression systems, vacuum systems, pneumatic systems. Please insert the tube into the bottom before use. Pack of 10pcs 12mm OD plastic straight tube fitting.
sourcing map - A good release cap can withstand greater and stronger pressure without tripping. Advantage-have abrasion resistance, and resistance to crushing and cracking, Compressive and corrosion resistant, light weight, good sealing performance and long service life.
sourcing map - Operating pressure : 0-1mpa ; operating temperature：-10 - 60 Degree Celsius. Advantage- this air fitting have abrasion resistance, and resistance to crushing and cracking, light weight, Compressive and corrosion resistant, good sealing performance and long service life.
sourcing map - Push-to-connect tube connection on one end and male threads on the other end. Material. Have abrasion resistance, light weight, compressive and corrosion resistant, and resistance to crushing and cracking, good sealing performance and long service life.
sourcing map - Operating pressure : 0-1mpa operating temperature：-10 - 60 Degree Celsius. Tube fittings. Product name : plastic tee connect fitting ;Three Tube Size OD : 12mm = 15/32". Quick and simple installation, designed for using to connect with polyethylene, nylon and PU tubing. Have abrasion resistance, and resistance to crushing and cracking, Compressive and corrosion resistant, light weight, good sealing performance and long service life. Material. Push-to-connect tube connection on Three end. A good release cap can withstand greater and stronger pressure without tripping. Advantage.
